Chinacoal07 Ultrasonic flaw detector SUB100,Ultrasonic flaw
Ultrasonic flaw detector SUB100
Digital Ultrasonic Flaw Detector SUB100
Features and Functions
•High right electroluminescent, strength light, weak light and
•32 independent sets of parameters can be set and save lots of
inspection procedure and standards, need no test block outside,
high work efficiency.
•Menu and sub-menu display in the same window, no need to search,
clear at a glance, simple and convenient to operate.
•Large capacity Li battery, low power consumption design, 20+ hours
•Can be connected to the printer, print inspection report and wave.
•Has auto-calibration function for normal probe, angle probe,
convenient to use.
•Square wave pulse generator, amplitude and pulse width can be
adjusted, suitable to test the defects of work piece with different
materials and depth.
•Peak value in the gate can be captured automatically.
•DGS(AVG) curve suitable to inspect forged piece etc.
•A-scan and B-scan to be selected.
•Waveform and channel parameters can be saved into U disk directly
or copied from the detector memory to the U disk then to be
processed by the host computer software.
•Based the curve surface diameter to calibrate the flaw location by
the curve surface calibration function.
Range: (0 ~ 6000) mm
Bandwidth: (0.2 ~ 15) MHz
Material Velocity: (1000 ~ 9999) m / s
Dynamic Range: ≥ 32dB
Vertical linear error: ≤ 3%
Horizontal linear error: ≤ 0.2%
Resolution:> 40dB (5P14)
Sensitivity Leavings: 60dB (flat-bottomed deep hole 200mm2)
Rejection: (0 to 80)% Linear
Noise level: ≤ 10%
Power supply: DC 9V; lithium batteries work for 4 to 8 hours or
Ambient temperature: (-20 ~ 50) °C
Relative Humidity: (20 ~ 95)% RH
SUB100 Standard Configuration
Straight Beam Probe
Machine-probe Cable (Q9-Q9)
Power Adapter (Charger)
�I"���� 0� size:10.5000pt; mso-font-kerning:1.0000pt; " >
From 200 to16000m/s. Continuously adjustable. Seven common
material’s sound velocity values.
From 0 %to 80%
1M, 2M, 4M, 5M, 10M,13M and 15M broadband
Vertical linearity error
Be less than or equivalent to 2.5%
Horizontal linearity error
Be less than 0,03%
More than dB(200Φ2 flat-bottomed hole)